Attention! The selected product is out of production.

Super Automatic Leverless Tire Changer

Super automatic leverless tire changer, with no use of the bead lifting lever, suitable for passenger car tires with rims 12"-34" (max. wheel diam. 1200 mm./47", max. wheel width 406 mm./16"). Equipped with ultra-quick wheel clamping system.

Top 20 Tools is a prize awarded by "Auto Repair & Maintenance" magazine, with the help of the American magazine "Motor". The award is given by a jury consisted of automotive industry experts, dealers, instructors and technicians to the tools that stand out for their usefulness and innovation.

Top 20 Tools 2011

Approved by
Inspection of mounting machine according to wdk-test guideline based on wdk-Mounting/Demounting Instructions UHP and Run Flat Tires.
(*) Version available upon request
Main Features
Car (TC)

Suitable for car wheels


Allows tire mounting/demounting operations without use of classic conventional tire lever, making the operations more practical, easy, intuitive and without any stress for the operator.


Model with four control pedals, tilting tower, sliding horizontal arm and operating arm with automatic lowering and locking by pushing button.


Allows to operate with tire assemblies from 12" to 34".


Tire changer with reinforced chassis.


Smart Lock
SMART LOCK is the fastest manual wheel clamping system on spindle chuck in the world. Thanks to the “expanding nut” (GIULIANO exclusive patent), you just need a 90° movement on the knob after dropping the shaft into the center hole, to have a complete, safe and reliable wheel clamping on your spindle chuck, with no need of tricky hooking. Complete wheel clamping operation needs just 2 seconds. The absence of a turntable plate removes the restraint of the clamping range, normally found on conventional rim-clamp tire changers.


Control Console
Control panel allows controlling each single automatic movement and positioning of the machine by an easy pressure on the buttons.


Roller Bead Breaking
Bead loosening by disks, without contact with the rim, works with tire assembly in horizontal position


Leverless tire mounting/demounting system QX, exclusively patented by GIULIANO, eliminate traditional tire bar, but leaves the whole tire mounting/demounting procedure exactly as it’s always been for the operator. Powerful and easy to use, it’s made by a finger tool, operated by an air cylinder, whose movement is exactly the same of the old, traditional tire bar, the difference being that its power is not the one of the operator, but the power of the air cylinder at 8-10BARs pressure.


Press Arm
Helps easy mounting/demounting of the second bead of ultra low profiled tires or run-flat.

Super automatic leverless tire changer, with no use of the bead lifting lever, suitable for passenger car tires with rims 12"-34" (max. wheel diam. 1200 mm./47", max. wheel width 406 mm./16"). Equipped with single arm/disk air operated bead loosener system and with patented ultra-quick wheel clamping system. Suggested for top professional tire specialists, servicing run flat and UHP tires with no tool/rim contact.
  • Single arm/disk air operated bead loosener system;
  • Reinforced Chassy and Tower;
  • Patented SMART LOCK ultra-quick wheel clamping system, through cone and shaft with Smart Lock nut;
  • Equipped with QX touchless mount/demount system, Giuliano Patent;
  • Double rotation speed by pedal, clockwise (motoinverter);
  • Tire inflation by pedal (standard);
  • Operated by pedal and control console;
  • Equipped with Press Arm (standard);
  • Suitable for Tire Lift (optional);
  • Suitable for Tubeless tire bead seating system (optional).
WDK: Version available upon request
Rim clamping range 12" - 34"
Max. tire diameter 1200 mm (47")
Max. tire width 406 mm (16")
Bead loosener force at 10 bar 12037 N
Operating pressure 8-10 bar (116-145 psi)
Power supply 220V - 1ph / 2 speed
Motor power 0,75 kW
Rotating speed 7-16 rpm
Pre-set tire inflating pressure 3,5 bar (50 psi)
Net weight 375 Kg
Max overall dimensions 1185x1960x2120 mm
Standard Accessories
Standard accessories
QX is a leverless mount/demount device, suitable for conventional, UHP and Run Flat tires. Exclusive GIULIANO Patent, it works in the same exact way of your traditional tire bar, but without operator\'s manual force. Activated by an air operated cylinder, and controlled by a simple switch, allows the finger tool to be inserted step by step into the wheel drop center, to ease demounting operations. With the same procedure, it can control bead lifting operation, to avoid damaging tire bead. Tool head is protected by nylon-kevlar inserts, easily replaceable, to avoid damages on alloy wheels. When combined with bead loosener disk or Help arm roller, it provides additional bead pressing power to mount top bead of most difficult low profiled and stiff sidewall tires. Its most innovative feature, though, is the chance to install it in a fast and easy way on all different types of conventional tire changers, even as a retro-fit kit. You can basically upgrade your conventional tire changer to a leverless model, in just a few minutes !
Pedal operated inflating device.
Air filter with pressure regulator and CE manometer.
Optional Accessories
Wheel clamping adaptor for reverse mounted wheels and wheels with no center hole
Kit of 7 long conical pins for FPM456
Kit of 6 spheric pins for FPM456
Truck cone kit, allows clamping VANs and LCVs wheels with center hole diameter from 120 to 190 mm.
Truck cone kit, allows clamping VANs and LCVs wheels with center hole diameter from 140 to 220 mm.
Double face cone for light trucks, allows clamping VANs and LCVs wheels with center hole diameter from 75 to 145 mm.
Cone for steel rims with low thickness and center hole diameter from 75 to 120 mm
G-CLAMP Set. Helps adding extra bead-pressure points on top bead while assembling it. Kit includes 2 regular and 2 extra-size G-clamps.
Kit of 4 rubber protections for steel rims.
Kit of 4 rubber protections for aluminium rims.
Kit of 4 rubber protectors for aluminium rims with arched spokes.
Lube paste bucket, 5 kg.
Kit of 2 shims for ring nut.
Plastic tire lever for soft tires removing operations. To be used during tire demounting in accordance with the WDK procedure.
Kit of 10 ABS protections for cone.
Kit of 10 rubber protections for clamping chuck faceplate
Additional disk arm for tire / wheel matching.
Longer bead pressing tool for Press Arm.
Air operated wheel positioner.
CE inflating gauge
Pneumatic wheel positioner.
Extra-CE inflating gauge.
Tubeless inflation external kit.
Kit of QX adaptors for connection to quick release kit (QCK).
Pressing cone for clamping RUN FLAT tires from outside.
Kit Run Flat UHP
Fixed roller plate, to ease bead loosening  of heavy wheels.

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.