PAR-MOVE concept high performance center post super-automatic Lever - NO Lever tire changer

Super automatic center post lever - no lever tire changer for wheels with rim from 12" to 30" (max. wheel diameter 1200 mm./47", max. wheel width 406mm./16"). Suggested for top professional tire specialists, servicing run flat and UHP tires with no tool/rim contact.

RUSC
0,56

Resistance Under Stress Coefficient (RUSC) gives some idea of how robust a tire changer can be, in terms of strength and power against all different kinds of stress involved in mounting/demounting tires. Do you want to know more about RUSC ? Click here !

Approved by
Inspection of mounting machine according to wdk-test guideline based on wdk-Mounting/Demounting Instructions UHP and Run Flat Tires.
(*) Version available upon request
Main Features
Car (TC)

Car
Suitable for car wheels

SUPER (TC)

Superautomatic
Model with four control pedals, tilting tower, sliding horizontal arm and operating arm with automatic lowering and locking by pushing button.

LNL (TC)

Lever NO Lever
The only system that combines the advantages of “leverless” device to those of a standard mount/demount tool.

12\

12"-30"
Allows to operate with tire assemblies from 12" to 30".

SLOCK

Smart Lock
SMART LOCK is the fastest manual wheel clamping system on spindle chuck in the world. Thanks to the “expanding nut” (GIULIANO exclusive patent), you just need a 90° movement on the knob after dropping the shaft into the center hole, to have a complete, safe and reliable wheel clamping on your spindle chuck, with no need of tricky hooking. Complete wheel clamping operation needs just 2 seconds. The absence of a turntable plate removes the restraint of the clamping range, normally found on conventional rim-clamp tire changers.

PANEL (TC)

Control Console
Control panel allows controlling each single automatic movement and positioning of the machine by an easy pressure on the buttons.

RBB (TC)

Roller Bead Breaking
Bead loosening by disks, without contact with the rim, works with tire assembly in horizontal position

CD Concept (TC)

Center Driven Concept
Bead loosener disks are slightly but purposely misaligned with the rim center for a better and faster penetration and immediate bead loosening

PAR MOVE (TC)

Parallelogram Move Concept
Robust fixed vertical tower with innovative parallelogram operating arm (PAR-MOVE Concept) allows to install tire changer in a working space corresponding to its actual overall dimensions inside the tire shop with no extra rear and side space required. The new design makes the tire changer extremely robust and stiff, granting increased rigidity and eliminating all flexes, and memorizing working position.

MD (TC)

Motorinverter Drive
Double rotation speed by pedal (Motoinverter)

BP1+ (TC)

Bead Pressing Arm Plus
BP1 Plus pneumatic bead pressing arm (GIULIANO patent) lifts up automatically at the end of the mounting procedure, and moves back in rest position, with no need for the operator to change his working position.

2SPEED (TC)

Two speed chuck
Two speed hydraulic chuck, allows to adjust rotation speed in accordance with the type of operation to perform, ensures work efficiency and safety.

Super automatic center post lever - no lever tire changer for wheels with rim from 12" to 30" (max. wheel diameter 1200 mm./47", max. wheel width 406mm./16").

Functions
  • Robust fixed vertical tower with innovative parallelogram operating arm (PAR-MOVE Concept);
  • Double arm/disk air operated bead loosener system;
  • Bead loosener disks are slightly but purposely misaligned with the rim center for a better and faster penetration and immediate bead loosening, Center Driven Concept (GIULIANO patent);
  • Reinforced Chassis. Fixed vertical tower and parallelogram operating arm makes S 121 extremely robust and stiff, granting increased rigidity and eliminating all flexes;
  • Operated by pedal and control console;
  • Patented SMART LOCK ultra-quick wheel clamping system, through cone and shaft with Smart Lock nut;
  • Equipped with Lever - NO Lever tire mounting/demounting system, Giuliano Patent, with combined option through patented Lever - NO Lever device;
  • Double rotation speed by pedal (motoinverter);
  • Tire inflation by pedal (standard);
  • Equipped with BP1 Plus bead pressing arm (standard), complete with self-storage function, GIULIANO patent;
  • Equipped with Box 120 Tools Storage Box (standard);
  • Suitable for Wheel Lifter and tubeless tire bead seating system (optional).
Rim clamping range 12" - 30"
Max. tire diameter 1200 mm (47")
Max. tire width 406 mm (16")
For reverse mounted wheels, variable according to rim features
Bead loosener cylinder force at 10 Bar 11770 N (1200 Kg)
Max. wheel weight 80 Kg
Operating pressure 8-10 bar (116-145 Psi)
Power supply 220V - 1ph
Motor power 0,75 kW / 2 speed
Rotating speed 7-16 rpm
Pre-set tire inflating pressure 3,5 bar (50 Psi)
Net weight 365 Kg
Dimensions (WxDxH) 1120-1690 x 1280 x 1770-2200 mm
Standard Accessories
Standard accessories

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information