13"-27" Allows to operate with tire assemblies from 13" to 27".
Jaw Clamping Rim clamping is performed by means of 4 jaws facing each other, driven by pneumatic cylinders connected to the control pedal.
Joystick Grants fast and accurate movements with maximum simplicity and accuracy.
Roller Bead Breaking Bead loosening by disks, without contact with the rim, works with tire assembly in horizontal position
Truck tire changer for mobile-service of truck, bus and road transportation vehicle tires, fits in most popular commercial vans. Tire changer suitable for truck wheels with 13"-27" rim (max wheel diameter 1600 mm./63", max. wheel width 870 mm./34"), equipped with single speed hydraulic clamping chuck and movable control unit, for safe and convenient operation. Suitable for tubeless tires only.
Functions
Hydraulic movement of clamping chuck holding arm (up-down);
Hydraulic travel movement of operating arm carriage (left-right);
Operating arm manual tilting and travelling on carriage;
Wheel clamping by fully hydraulic operated jaws;
Machine installation from the side or back door of the van;
Clamping chuck holding arm tilts outside the van-door. Folds back inside the van after use;
All motions controlled by joysticks and pedal box;
Emergency safety button on control console and generator, for stopping all functions;
Rim center hole clamping range ø 80 - 700 mm;
Clamping chuck minimum height from ground 330 mm (according to van's floor height);
Available in version without generator and compressor (optional).
See generator and compressor specs here below
Generator
Power - 10,6 kW;
Supply - Diesel;
Cooling - H2O;
Compressor
Capacity - 100 lt;
Air delivery - 650 lt/min;
Voltage - 230V 1ph/400V 3 ph;
Also equipped with 2 air feeding plugs and hoses, complete with coilers mt. 10, plus one
extra electric plug for connecting 220V-1ph outlet.
Rim clamping range
13" - 27"
Max. tire diameter
1600 mm (63")
Max. tire width
870 mm (34")
Bead loosener force
16900 N
Operating pressure
120 bar (1740 psi)
Power supply
400V - 3ph Other voltages and frequencies available upon request
Hydraulic pump motor power
1,1 kW
Clamping chuck motor power
1,1 kW
Net weight
860 kg - 492 kg Net weight without compressor/generator
Max. tire assembly weight
1000 kg
Max overall dimensions
1700x1070x1580 mm
Product Details
This document includes all information about the product
