S 551 XLA
S 551 XLA

Automatic Heavy Duty Truck tyre fitting machine, suitable for truck and agriculture tyres, 14" - 56"(1)

Automatic tyre fitting machine suitable for truck and heavy duty tyres with 14" - 56"(1) rim (max. wheel diameter 2300 mm / 90,5"; max. wheel width 1100 mm / 43") equipped with two-speed hydraulic clamping chuck tool holder arm carriage with automatic movement, and mobile control unit for safe and convenient operation.
Suggested for truck, bus and agriculture tyres, professional truck tyre service and high volume shops. Suitable for both tube and tubeless tyres.


  • Hydraulic movement of clamping chuck holding arm (up-down);
  • Hydraulic travel movement of operating arm carriage (left-right);
  • Operating arm automatic tilting and travelling on carriage;
  • Double tool (disk + finger) manual rotation;
  • Wheel clamping by fully hydraulic operated jaws;
  • Operating arm and clamping chuck arm facing each other;
  • All motions controlled by console and pedal box;
  • Emergency safety button on control console, for stopping all functions;
  • Suitable for control console installation on pivoting arm (optional);
  • Rim center hole clamping range ø 80 - 1200 mm;
  • Clamping chuck minimum height from ground 315 mm (center);
  • Suitable for remote control installation (optional).
(1) For the rims from 47" to 56" it is necessary to use the optional set of 4 jaw extensions for clamping wheels from 47" to 56".
Standard Features
Rim clamping range without extensions 14" - 46"
Rim clamping range with extensions (optional) 14" - 56"
Max. tyre diameter 2300 mm (90,5")
Max. tyre width 1100 mm (43")
Bead breaker force 26350 N
Operating pressure 130 bar (1885 psi)
Power supply 400V (50 Hz) - 3ph / 2 speed
Hydraulic pump motor power 1,1 kW
Clamping chuck motor power 1,3 / 1,8 kW
Net weight 850 kg
Max. tyre assembly weight 1500 kg
Max overall dimensions 2000÷2450x1800÷2250x880÷1840 mm

Standard Accessories

Standard accessories

Optional Accessories

Roller tool for mounting / demounting tubeless truck tyres
Kit of spacers for the clamping jaws, for locking wheels with various thickness of flanging.
Bead guide lever.
Set of 2 G-clamps for tyres with retaining ring. To hold rim and bead retaining ring during bead breaking operation.
Kit of clamp protections in aluminium for alloy rims.
Clamp for alu-rims.
Kit of 4 clamp extensions for clamping range from 47" to 56".
Multichannel radio control 433 MHz.
Bead clamp with extra slide, for skidder tyre applications.
G-Clamp with wider bead-press angle, for agriculture tyres.
Thank you for your interest in Giuliano products. Please let us know your requirements, or find a dealer near you.

To request more info or receive a quotation please apply to Giuliano Industrial staff
Find the nearest authorized reseller