PAR-MOVE concept High Performance super automatic tyre changer with combined two assist arms

Super automatic tyre changer for wheels with rim from 10" to 28" (max. wheel diameter 1200 mm./47", max. wheel width 406mm./16"). Equipped with two assist arms it's suggested for top professional tyre specialists, and high volume tyre shops, servicing all kinds of car, racing, run flat and UHP tyres.

RUSC
0,6

Resistance Under Stress Coefficient (RUSC) gives some idea of how robust a tyre changer can be, in terms of strength and power against all different kinds of stress involved in mounting/demounting tyres. Do you want to know more about RUSC ? Click here !

Approved by
Inspection of mounting machine according to wdk-test guideline based on wdk-Mounting/Demounting Instructions UHP and Run Flat Tyres.
(*) Version available upon request
Main Features
Car (TC)

Car
Suitable for car wheels

SUPER (TC)

Superautomatic
Model with four control pedals, tilting tower, sliding horizontal arm and operating arm with automatic lowering and locking by pushing button.

10\

10"-28"
Allows to operate with tyre assemblies from 10" to 28".

RACING (TC)

Racing
Tyre changer with reinforced chassis.

JC (TC)

Jaw Clamping
Rim clamping is performed by means of 4 jaws facing each other, driven by pneumatic cylinders connected to the control pedal.

BBB (TC)

Blade Bead Breaking
Bead breaking by conventional blade, works with tyre assembly in vertical position

PAR MOVE (TC)

Parallelogram Move Concept
Robust fixed vertical tower with innovative parallelogram operating arm (PAR-MOVE Concept) allows to install tyre changer in a working space corresponding to its actual overall dimensions inside the tyre shop with no extra rear and side space required. The new design makes the tyre changer extremely robust and stiff, granting increased rigidity and eliminating all flexes, and memorizing working position.

HLP (TC)

Help
Helps easy mounting/demounting of tyres, keeping down the tyre bead and allowing an easy introduction of bead lever as well as an easy setting in position of the second bead.

BP1+ (TC)

Bead Pressing Arm Plus
BP1 Plus pneumatic bead pressing arm (GIULIANO patent) lifts up automatically at the end of the mounting procedure, and moves back in rest position, with no need for the operator to change his working position.

PO (TC)

Power Out
Patented GIULIANO device to prevent bead breaker blade from getting stuck between rim and tyre bead during bead breaking operation.

SBS (TC)

Smart Blade System
Patented GIULIANO device to memorise bead breaker arm/shovel travel; it is possible to pre-set the starting and final position of bead breaker arm movement. It allows to break the bead of a full set of four wheels without using hands on both bead breaker arm and blade.

PX (TC)

Power X
Turntable plate with 4 cylinders, exclusively patented by GIULIANO, allows clamping tyre assembly with higher power, reliability and safety.

2SPEED (TC)

Two speed chuck
Two speed hydraulic chuck, allows to adjust rotation speed in accordance with the type of operation to perform, ensures work efficiency and safety.

High performance super automatic tyre changer for wheels with rim from 10" to 28" (max. wheel diameter 1200 mm./47", max. wheel width 406mm./16"). Unlike the base model SX 120 this one it's equipped with combined two assist arms.

Functions
  • Robust fixed vertical tower with innovative parallelogram operating arm (PAR-MOVE Concept);
  • Bead breaker double effect cylinder Ø 200 mm;
  • Reinforced Chassis. Fixed vertical tower and parallelogram operating arm makes SX 120 PRO DUO extremely robust and stiff, granting increased rigidity and eliminating all flexes;
  • Tabletop thickness 14 mm w/POWER X four cylinders clamping system (Giuliano Patent);
  • Double rotation speed by pedal (motoinverter);
  • Tyre inflation by pedal (standard);
  • Patented SBS System for bead breaker shovel travel memory. Adjustable bead breaker shovel angle;
  • PO System, Giuliano patent, for granting no bead breaker shovel stuck into the rim during bead breaking operations;
  • Equipped with BP1 Plus bead pressing arm (standard), complete with self-storage function, GIULIANO patent;
  • Equipped with Help 120 additional pneumatic helper tower and Box 120 Tools Storage Box (standard);
  • Suitable for Wheel Lifter and tubeless tyre bead seating system (optional).
Rim clamping range from outside 10" - 26"
Rim clamping range from inside 12" - 28"
Max. tyre diameter 1200 mm (47")
Max. tyre width 406 mm (16")
Bead breaker cylinder force at 10 Bar 30800 N (3140 Kg)
Operating pressure 8-10 bar (116-145 psi)
Power supply 220V 1ph 50/60 Hz
Motor power 0,75 kW
(with motoinverter)
Rotating speed 8-16 rpm
Pre-set tyre inflating pressure 3,5 bar (50 psi)
Net weight 395 Kg
Max overall dimensions 1760x1250x2200 mm
Standard Accessories
Standard accessories
Bead pressing arm, complete with selfstorage function, GIULIANO patent.
Additional pneumatic helper tower for fitting/removing low-profiled and UHP tyres. Equipped with an additional tilting roller tool for lower bead.
Tools Storage Box
Fixed roller plate, to ease bead breaking of heavy wheels.
Optional Accessories
NYLON CONE FOR SPECIAL LAMBORGHINI WHEELS, allows clamping wheels with center hole diameter from 55 to 85 mm.
NYLON CONE FOR SPECIAL PORSCHE WHEELS, allows clamping wheels with center hole diameter from 60 to 85 mm.
NYLON CONE FOR SPECIAL BMW WHEELS, allows clamping wheels with center hole diameter from 55 to 70 mm.
G-CLAMP Set. Helps adding extra bead-pressure points on top bead while assembling it. Kit includes 2 regular and 2 extra-size G-clamps.
Kit of rubber coated jaw protectors.
Kit of 4 rubber protections for steel rims.
Kit of 4 rubber protections for aluminium rims.
Kit of 4 rubber protectors for aluminium rims with arched spokes.
Lube paste bucket, 5 kg.
Pneumatic wheel lifter
CE inflating gauge
Extra-CE inflating gauge.
Tubeless inflation external kit
Kit of rubber protections for clamping rims from inside using conventional jaws.
Kit of 4 motorcycle wheels clamping adaptors, 6" - 24", with screw lock.
Kit of 4 clamping adaptors for HARLEY DAVIDSON wheels, oversize height, 6" - 24", with screw lock.
Quick release kit for mounting tools (includes one plastic tool and one hub for connecting the tool delivered with the tyre-changer).
Mounting/demounting tool for soft tyres on steel wheels, including hub for connection to quick release kit (QCK)
Mounting/demounting tool for arched spokes rims, including hub for connection to quick release kit (QCK).
Mounting/demounting tool for iron wheels with projecting central hub, including hub for connection to quick release kit (QCK)
QX is a leverless mount/demount device, suitable for conventional, UHP and Run Flat tyres. Exclusive GIULIANO Patent, it works in the same exact way of your traditional tyre bar, but without operator\'s manual force. Activated by an air operated cylinder, and controlled by a simple switch, allows the finger tool to be inserted step by step into the wheel drop center, to ease demounting operations. With the same procedure, it can control bead lifting operation, to avoid damaging tyre bead. Tool head is protected by nylon-kevlar inserts, easily replaceable, to avoid damages on alloy wheels. When combined with bead breaker disk or Help arm roller, it provides additional bead pressing power to mount top bead of most difficult low profiled and stiff sidewall tyres. Its most innovative feature, though, is the chance to install it in a fast and easy way on all different types of conventional tyre changers, even as a retro-fit kit. You can basically upgrade your conventional tyre changer to a leverless model, in just a few minutes !
Kit of QX adaptors for connection to quick release kit (QCK).
Kit of 10 rear plastic protections, for QX and QX Plus.
Kit of 10 front plastic protections, for QX and QX Plus.
Manual bead depressor.
Manual bead depressor with extendable travelling pad.
Pressing cone for clamping RUN FLAT tires from outside.
Kit Run Flat UHP

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information