AUTOMATIC TOUCHLESS TYRE CHANGERS
Automatic tilt-back “touchless” tire changer, with no use of the bead lifting lever, suitable for passenger car tires with rims 10”-34” (max. tire diam. 1200 mm./47”, max. tire width 410 mm./16”).
- Air-electric power supply
- Controls by pedal and pushing buttons
- Tilt-back column, pedal operated
- Pneumatic control for up/down movement of hex bar operating arm
- Wheel clamping by cones and ring nut on clamping chuck
- Bead breaking by disks, with bead breaker disk/arm tilt down by hand – air operated bead breaker arm positioning, operated by pushing button
- Two speed motor, 400V-3ph-50Hz
- Standard equipped with air operated PRESS ARM tower, to ease fitting/removing operations on low profiled and Run Flat tires.
- Standard equipped with air operated touchless system QX, for mounting/demounting all kinds of passenger car tires without using con-ventional bead lifting lever.
Select "Instructions for use" from menu at right side to get information about the features of tyre-changer CROSSAGE.