S 551 XL

Heavy duty tire changing machine suitable for truck, bus and agriculture tires, 14"-46"/58"(1)

Heavy duty tire changing machine for truck, bus and agriculture tires with 14"-46"/58" rim (max. tire diameter 2300 mm./90,5", max. tire width 1100 mm./43"). Suggested for professional truck tire service and high volume shops. Suitable for both tube and tubeless tires.

Approved by
Main Features
Truck (TC)

Truck
Suitable for truck wheels

TRACTOR (TC)

Tractor
Suitable for agricultural tires and heavy duty tires

14\

14"-58"
Allows to operate with tire assemblies from 14" to 58" (optional)

JC (TC) TRUCK

Jaw Clamping
Rim clamping is performed by means of 4 jaws, driven by hydraulic cylinder.

PANEL (TC) - TRUCK

Control Console
Ergonomic control console allows controlling each single automatic movement and positioning of the machine by using a pedal and joystick.

RBB (TC) - DISK VERT

Roller Bead Breaking
Bead breaking by disk, works with tyre assembly in vertical position

2SPEED (TC) HYD

Two speed chuck
Two speed hydraulic chuck, allows to adjust rotation speed in accordance with the type of operation to perform, ensures work efficiency and safety.

Heavy duty tire changing machine suitable for truck and heavy duty wheels with 14"-46"/58"(1) rim (max. wheel diameter 2300 mm./90,5", max. wheel width 1100 mm./43"). Equipped with two-speed hydraulic clamping chuck and movable control unit, for safe and convenient operation. Suitable for both tube and tubeless tires.

Functions
  • Hydraulic movement of clamping chuck holding arm (up-down);
  • Hydraulic travel movement of operating arm carriage (left-right);
  • Operating arm manual tilting and travelling on carriage;
  • Double tool (disk + finger) manual rotation;
  • Wheel clamping by fully hydraulic operated jaws;
  • Operating arm and clamping chuck arm facing each other;
  • All motions controlled by console and pedal box;
  • Emergency safety button on control console, for stopping all functions;
  • Suitable for control console installation on pivoting arm (optional);
  • Rim center hole clamping range ø 80 - 1200 mm;
  • Clamping chuck minimum height from ground 315 mm (center);
  • Suitable for remote control installation (optional).
(1) For the rims from 47" to 58" it is necessary to use the optional set of 4 jaw extensions for clamping wheels from 47" to 58".
Made In Italy
Rim clamping range without extensions 14" - 46"
Rim clamping range with extensions (optional) 14" - 58"
Max. tire diameter 2300 mm (90,5")
Max. tire width 1100 mm (43")
Bead loosener force 26900 N
Operating pressure 130 bar (1885 psi)
Power supply 400V - 3ph / 2 speed
Other voltages and frequencies available upon request
Hydraulic pump motor power 1,1 kW
Clamping chuck motor power 1,3 / 1,8 kW
Net weight 830 kg
Max. tire assembly weight 1500 kg
Max overall dimensions 2000÷2450x1640÷2390x880÷1840 mm
spinner

Find your nearest Giuliano Automotive Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Automotive can now offer you the right product, which best suits your needs.


Information