S 855 EVO Plus

Digital electronic diagnostic wheel balancer with touch screen video display

Digital electronic diagnostic wheel-balancer with touch screen video display. Equipped with new concept wheel guard, air operated wheel clamping system, automatic measurement of diameter and distance without the need to use the measuring gauge. Equipped with sonar detectors for automatic measurements of wheel width (LA) and radial run out (ROM), LASER LINE for exact positioning of clip weights and LASER POINTER for exact positioning of adhesive weights. LED light beam to illuminate the inside of the rim to enable positioning of adhesive weight in 6:00 o’clock position. Automatic positioning of balancing weight, self-diagnosis and balancing without need of check-spin. Equipped with special programs for balancing weight minimization, statistics of the used weights, residual dynamic imbalance notice, correct positioning of each balanced tire on vehicle.

Approved by
Main Features
0W

OptiWeight System
The OptiWeight (OW) System, which reduces the number of counterweights needed, by minimising static imbalance.

19\

19" Touch Screen TFT High Definition Monitor
19” TFT flat-screen, high-res colour monitor with Touch Screen control.

Air Lock

Air Lock
Pneumatically locks the wheel onto the shaft of the wheel balancer. Besides speeding up the operation, it also centres the wheel with extreme precision, because the gas springs actuated by the pneumatic system always tighten the wheel with the same pressure.

FES

Fast & Easy Split
Fast & Easy Split (FES) divides the counterweight needed to correct imbalance, based on the installation position behind the spokes of the aluminium rim. Requires a very simple, very quick operation without the need to enter the number of spokes or other preliminary data. The fastest Split system out there!!

LA

Automatic Measurement of Wheel Width
Automatic measurement by a SONAR detection system of the width of the wheel to be balanced (LA). Provides an immediate, precise reading without the need for the operator to do anything.

Lock

Lock
An electromagnetic brake automatically locks the wheel and the gauge into the proper position for installing the weight.

NWN

No Wheel Needed
“No Wheel Needed” (NWN) system for calibrating gauges. The gauge shaft or Sonar detector is positioned at a given distance from the fixed points established for the procedure, without the need for using sample wheels.

OPF

Opposite  Weight Function
Opposite weight function (OWF) positions the counterweight at the bottom of the aluminium rim (at 6:00), where manual installation of the weight is easier and more accessible. The function requires a very simple operation, combined with a 180° rotation of the rim.

ROM

Radial run Out Measurement
Automatic measurement of radial eccentricity (ROM) by a SONAR detection system. Provides an immediate, precise reading without the need for the operator to do anything.

TS

Tire Set function
Tire Set (TS) system suggests the best position for the wheels on the vehicle (front, rear, right and left) based on the level of imbalance reduction achieved on each wheel.

CAR (WB)

Car
Suitable for car wheels

NCN (WB)

No Caliber Need
NCN System is an innovative laser system, which in combination with LA Sonar automatically detects all wheel measurements needed for balancing, without the need to use the measuring gauge.

NCS (WB)

No Check-Spin
No Check-Spin (NCS) system to avoid check-spin after positioning of balancing weights, thanks to the high accuracy of the measuring system.

LED LIGHT (WB)

LED LIGHT
LED light beam to illuminate the inside of the rim and work safely.

USB (WB)

USB
Suitable for USB connection to load customized graphic and software updates, as well as to download statistical data on the consumption of wheel weights.

LASER LINE (WB)

LASER LINE
LASER LINE for exact positioning of clip weights.

PRINTER (WB)

PRINTER
Can be connected to color printer for balancing certificate printout.

LASER POINT (WB)

LASER POINT
LASER POINTER for exact positioning of adhesive weight.

Digital electronic diagnostic wheel-balancer with touch screen video display. Equipped with new concept wheel guard, air operated wheel clamping system, automatic measurement of diameter and distance without the need to use the measuring gauge. Equipped with sonar detectors for automatic measurements of wheel width (LA) and radial run out (ROM), LASER LINE for exact positioning of clip weights and LASER POINTER for exact positioning of adhesive weights. LED light beam to illuminate the inside of the rim to enable positioning of adhesive weight in 6:00 o’clock position. Automatic positioning of balancing weight, self-diagnosis and balancing without need of check-spin. Equipped with special programs for balancing weight minimization, statistics of the used weights, residual dynamic imbalance notice, correct positioning of each balanced tire on vehicle.

Functions
  • Touch screen HD color video monitor 19” TFT;
  • Automatic measuring of wheel diameter and distance by laser (acquisition without caliber);
  • Automatic measuring of wheel width through SONAR LA;
  • Automatic measuring of radial run out by SONAR (ROM);
  • Pneumatic wheel locking;
  • Automatic START and STOP;
  • Static and dynamic balancing;
  • Huge combination of ALU programs Special ALU-S program;
  • NWN system;
  • FES function;
  • OPTIMATCH function;
  • Self-diagnosis and balancing by NCS System without need of check-spin;
  • LED light to illuminate working area;
  • Automatic positioning of balancing weight by laser pointer and electric brake;
  • Laser line indicator for easy application of clip weights;
  • OPF function;
  • OW function;
  • TS function;
  • Stats of wheel weight usage;
  • Optimization of static unbalance;
  • Complete with cones and pneumatic clamping ring nut;
  • Complete with Wheel guard;
  • Equipped with USB technology;
  • Printer with connection cable (optional).
Max. wheel weight 75 Kg
Max. tire diameter 1100 mm
Rim diameter 10"-30" / 255-765 mm
Rim width 1,5"-20" / 40-510 mm
Power supply 230V 1ph (50/60 Hz)
Cycle time 4,7s (5 3/4"x14") 15 Kg
Rotating speed < 100 rpm
Balancing precision ÷ 0,5 g
Operating pressure 8-10 bar (115-145 PSI)
Net weight with guard 107 Kg
Dimensions (WxDxH) 1430x1350x1360÷1805 mm
Standard Accessories
LA sonar for automatic measuring of wheel width.
ROM Sonar for automatic measuring of radial RUN OUT
Standard accessories
Standard accessories
Optional Accessories
Wheel clamping adaptor for wheels without central hole or with special flanging
Kit of 5 quick-lock centering stud bolts for Unilug
Set of 5 extra-long spherical nuts for Unilug
Clamping cone with spacer for SUV and 4WD wheels; central hole diam. 122-174 mm
Clamping cone with spacer for clamping wheels of LCVs and vans; central hole diam. 198-225 mm
Special cone for clamping wheels from outside; central hole diam. 100-118 mm
Spacer kit for clamping SUV or 4WD all terrain wheels, to prevent the wheel from touching wheelbalancer baseframe.
Wheel clamping adaptor with flange and 4 centering stud bolts, for wheels with max. 4 lug holes
Wheel clamping adaptor with flange and 5 centering stud bolts, for wheels with max. 5 lug holes
Wheel clamping adaptor with flange and 6 centering stud bolts, for wheels with max. 6 lug holes
RL protective sleeve for alloy rims.
WBL81 wheel lift, for wheel easy positioning and centering on the shaft, without any effort for the operator.
Printer with connection cable

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information