Digital electronic automatic wheel-balancer with video display, wheel guard, automatic measuring gauges and pneumatic locking system

Digital electronic automatic wheel-balancer with video display, automatic measuring gauges, pneumatic locking system and new concept wheel guard. Equipped with all balancing programs for special wheels and aluminium rims (ALU and ALU-S) and balancing weight optimization program.

Approved by
Main Features
0W

OptiWeight System
The OptiWeight (OW) System, which reduces the number of counterweights needed, by minimising static imbalance.

19\

19" TFT High Definition Monitor
19” TFT flat-screen, high-res colour monitor.

Air Lock

Air Lock
Pneumatically locks the wheel onto the shaft of the wheel balancer. Besides speeding up the operation, it also centres the wheel with extreme precision, because the gas springs actuated by the pneumatic system always tighten the wheel with the same pressure.

FES

Fast & Easy Split
Fast & Easy Split (FES) divides the counterweight needed to correct imbalance, based on the installation position behind the spokes of the aluminium rim. Requires a very simple, very quick operation without the need to enter the number of spokes or other preliminary data. The fastest Split system out there!!

LA

Automatic Measurement of Wheel Width
Automatic measurement by a SONAR detection system of the width of the wheel to be balanced (LA). Provides an immediate, precise reading without the need for the operator to do anything.

Lock

Lock
An electromagnetic brake automatically locks the wheel and the gauge into the proper position for installing the weight.

NWN

No Wheel Needed
“No Wheel Needed” (NWN) system for calibrating gauges. The gauge shaft or Sonar detector is positioned at a given distance from the fixed points established for the procedure, without the need for using sample wheels.

OPF

Opposite  Weight Function
Opposite weight function (OWF) positions the counterweight at the bottom of the aluminium rim (at 6:00), where manual installation of the weight is easier and more accessible. The function requires a very simple operation, combined with a 180° rotation of the rim.

CAR (WB)

Car
Suitable for car wheels

The balancer is equipped with adjustable TFT 19" colour flat screen, new concept wheel guard, automatic measuring gauges and pneumatic locking system.
It is standard delivered with cones and pneumatic clamping ring nut, as well as with a new concept wheel guard.
Functions
  • Flat screen HD color video monitor 19" TFT;
  • Automatic measuring of wheel diameter and distance;
  • Automatic measuring of wheel width through SONAR LA;
  • Pneumatic wheel locking;
  • Automatic START and STOP;
  • Static and dynamic balancing;
  • Huge combination of ALU programs;
  • NWN system;
  • Special ALU-S program;
  • FES function;
  • OPTIMATCH function;
  • Self-diagnosis / Self-calibration;
  • Automatic positioning of wheel weight;
  • OPF function;
  • OW function;
  • Optimization of static unbalance;
  • CLIP system for application of stick-on weight;
  • Complete with cones and pneumatic clamping ring nut;
  • Complete with Wheel guard;
  • Complete with huge storage box for tools and accessories;
  • Automatic measuring of radial run out by SONAR (ROM) available as optional.
Max. wheel weight 75 kg
Max. tyre diameter 1100 mm
Rim diameter 10"-30" / 255-765 mm
Rim width 1.5"-20" / 40-510 mm
Power supply 230V - 1ph - 50/60 Hz
Cycle time 4.7s (5 3/4 "x 14") 15 Kg
Balancing speed < 100 rpm
Balancing precision ± 0.5g
Operating pressure 8-10 bar (116-145 PSI)
Net weight 125 kg
Standard Accessories
Standard accessories
Standard accessories
Standard accessories
Standard accessories
LA sonar for automatic measuring of wheel width.
Optional Accessories
FRU 345-C wheel clamping adaptor for wheels without central hole or
with special flanging
SR-USA wheel clamping adaptor, with flange and 6 centering stud bolts.
For American car wheels.
(Only for models with pneumatic locking system)
SR-4 wheel clamping adaptor with flange and 4 centering stud bolts, for
wheels with max. 4 holes. Only for models with pneumatic locking system)
SR-5 wheel clamping adaptor with flange and 5 centering stud bolts, for
wheels with max. 5 holes.
(Only for models with pneumatic locking system)
SR-5/2 wheel clamping adaptor with flange and 5 centering stud bolts, for
wheels with max. 5 holes.
(Only for models with pneumatic locking
system)
SR-6 wheel clamping adaptor with flange and 5 centering stud bolts, for
wheels with max. 6 holes.
CGR 223 clamping cone with spacer, for wheels of LCVs and vans; central
hole diam. 190-223 mm.
G/40 spacer disk + V°//L2 cone, for clamping wheels of LCVs and vans;
central hole diam. 97-180 mm.
V°/L2 clamping cone without spacer, for wheels of LCVs and vans; central
hole diam. 97-180 mm.
GG spacer disk, to be matched to G/40 + V°/L2 for clamping wheels of LCVs
and vans with convex tires.
MT special cone for clamping wheels of German cars; central hole diam.
56,5-57-66,5-72,5 mm.
WD + DC spacer kit for clamping SUV or 4WD all terrain wheels, to prevent
the wheel from touching wheel-balancer baseframe.
RL protective sleeve for alloy rims.
J special cone for clamping wheels from outside; central hole diam. 102-
118 mm.
ROM Sonar for automatic measuring of radial RUN OUT
WBL81 wheel lift, for wheel easy positioning and centering on the shaft, without any effort for the operator.
Clamping adaptor for motorcycle wheels.
Complete with weight for self-calibration and QuickFix clamping device.
Kit of GBRM clamping bushes, for back wheels of Vespa and Exagon scooters. To be used always with shaft diam. 14 mm. and with clamping adaptors for motorcycle wheels (only in combination
with 9316175)
Kit of clamping cones for shaft diam. 14 mm, for scooter wheels with central
hole diam. 16-45 mm. (for SUZUKI GS X750R, GSX1300 R Hayabusa, RF400RV, Honda NTV, Guzzi V11, Yamaha and Ducati 999 wheels). Only in combination with 9316175.
Kit of GBRM clamping bushes with shaft diam. 14mm., for Yamaha
GTS1000 (only in combination with 9316175)
Central shaft diam. 18mm., for clamping wheels with central hole diam.
18-28 mm (only in combination with 9316175)
Kit of adapters for DUCATI
(only in combination with 9316175 and 9311314)
GBRM clamping adaptors for scooters (wheels diam. 500 - 340 mm). Only in combination with 9316175.

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information