Attention! The selected product is out of production.

Super Automatic Leverless tire changer with double bead loosener arm

Super automatic leverless tire machine with double bead loosener arm, suitable for car wheels with rim from 12" to 34" (max. wheel diam. 1200 mm./47", max. wheel width 406 mm./16"). Suggested for top professional tire specialists, servicing run flat and UHP tires with no tool/rim contact.

Top 20 Tools is a prize awarded by "Auto Repair & Maintenance" magazine, with the help of the American magazine "Motor". The award is given by a jury consisted of automotive industry experts, dealers, instructors and technicians to the tools that stand out for their usefulness and innovation.

Top 20 Tools 2013

Approved by
Inspection of mounting machine according to wdk-test guideline based on wdk-Mounting/Demounting Instructions UHP and Run Flat Tires.
(*) Version available upon request
Main Features
Car (TC)

Car
Suitable for car wheels

LVL (TC)

LeVerLess
Allows tire mounting/demounting operations without use of classic conventional tire lever, making the operations more practical, easy, intuitive and without any stress for the operator.

SUPER (TC)

Superautomatic
Model with four control pedals, tilting tower, sliding horizontal arm and operating arm with automatic lowering and locking by pushing button.

12\

12"-34"
Allows to operate with tire assemblies from 12" to 34".

RACING (TC)

Racing
Tire changer with reinforced chassis.

QC OLD (TC)

Quick Clamping
Rim clamping is made through a cone and a quick ring nut. The absence of a turntable plate removes the restraint of the clamping range, normally found on conventional rim-clamp tire changers.

SLOCK

Smart Lock
SMART LOCK is the fastest manual wheel clamping system on spindle chuck in the world. Thanks to the “expanding nut” (GIULIANO exclusive patent), you just need a 90° movement on the knob after dropping the shaft into the center hole, to have a complete, safe and reliable wheel clamping on your spindle chuck, with no need of tricky hooking. Complete wheel clamping operation needs just 2 seconds. The absence of a turntable plate removes the restraint of the clamping range, normally found on conventional rim-clamp tire changers.

PANEL (TC)

Control Console
Control panel allows controlling each single automatic movement and positioning of the machine by an easy pressure on the buttons.

RBB (TC)

Roller Bead Breaking
Bead loosening by disks, without contact with the rim, works with tire assembly in horizontal position

QX (TC)

QX
Leverless tire mounting/demounting system QX, exclusively patented by GIULIANO, eliminate traditional tire bar, but leaves the whole tire mounting/demounting procedure exactly as it’s always been for the operator. Powerful and easy to use, it’s made by a finger tool, operated by an air cylinder, whose movement is exactly the same of the old, traditional tire bar, the difference being that its power is not the one of the operator, but the power of the air cylinder at 8-10BARs pressure.

PA (TC)

Press Arm
Helps easy mounting/demounting of the second bead of ultra low profiled tires or run-flat.

2SPEED (TC) PNE

Two speed chuck
Two speed pneumatic chuck, allows to adjust rotation speed in accordance with the type of operation to perform, ensures work efficiency and safety.

EVOlution non revolution. CrossageEVO is the natural EVOlution of the Top 20 Tools 2011 winner tire machine Crossage. A jury consisted of automotive industry experts, dealers and technicians recognize its incomparable usefulness and its innovating features and awarded the tire machine with the Top 20 Tools 2013 prize. Super-automatic leverless tire machine, suitable for car wheels with rim from 12" to 34" (max. wheel diameter 1200 mm./47", max. wheel width 406 mm./16"). Equipped with double arm (disk) air operated bead loosener system and with patented ultra-quick wheel clamping system.
Suggested for top professional tire specialists, servicing run flat and UHP tires with no tool/rim contact.
Functions
  • Double arm/disk air operated bead loosener system;
  • Reinforced Chassy and Tower;
  • Patented SMART LOCK ultra-quick wheel clamping system, through cone and shaft with Smart Lock nut;
  • Equipped with QX leverless mount/demount system, Giuliano Patent;
  • Double rotation speed by pedal both clockwise and counter-clockwise (motoinverter);
  • Tire inflation by pedal (standard);
  • Operated by pedal and control console;
  • Equipped with Press Arm (standard);
  • Suitable for Tire Lift (optional);
  • Suitable for Tubeless tire bead seating system (optional);
  • Quick pneumatic wheel locking through clamping chuck/cone (optional).
WDK: Version available upon request
Rim clamping range 12" - 34"
Max. tire diameter 1200 mm (47")
Max. tire width 406 mm (16")
Bead loosener force at 10 bar 12037 N
Operating pressure 10 bar (145 psi)
Power supply 220V - 1ph / 2 speed
Motor power 0,75 kW
Rotating speed 7-16 rpm
Pre-set tire inflating pressure 3,5 bar (50 psi)
Net weight 415 Kg (+ 10 kg pneumatic locking device)
Max overall dimensions 1185x1960x2120 mm

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information