Attention! The selected product is out of production.

Super-Automatic no contact robotic tire changer

Super automatic no contact (without use of bead lifting lever) robotic tire changer suitable for fitting/removing all kinds of passenger car and LCV tires from 12" to 34" (max. wheel diam. 1200 mm./47", max. wheel width 406 mm./16"). Suggested for top professional tire specialists, servicing run flat and UHP tires with no tool/rim contact.

Approved by
Inspection of mounting machine according to wdk-test guideline based on wdk-Mounting/Demounting Instructions UHP and Run Flat Tires.
(*) Version available upon request
Main Features
Car (TC)

Car
Suitable for car wheels

LVL (TC)

LeVerLess
Allows tire mounting/demounting operations without use of classic conventional tire lever, making the operations more practical, easy, intuitive and without any stress for the operator.

12\

12"-34"
Allows to operate with tire assemblies from 12" to 34".

RACING (TC)

Racing
Tire changer with reinforced chassis.

QC OLD (TC)

Quick Clamping
Rim clamping is made through a cone and a quick ring nut. The absence of a turntable plate removes the restraint of the clamping range, normally found on conventional rim-clamp tire changers.

SLOCK

Smart Lock
SMART LOCK is the fastest manual wheel clamping system on spindle chuck in the world. Thanks to the “expanding nut” (GIULIANO exclusive patent), you just need a 90° movement on the knob after dropping the shaft into the center hole, to have a complete, safe and reliable wheel clamping on your spindle chuck, with no need of tricky hooking. Complete wheel clamping operation needs just 2 seconds. The absence of a turntable plate removes the restraint of the clamping range, normally found on conventional rim-clamp tire changers.

JOYSTICK

Joystick
Grants fast and accurate movements with maximum simplicity and accuracy.

RBB (TC)

Roller Bead Breaking
Bead loosening by disks, without contact with the rim, works with tire assembly in horizontal position

PA (TC)

Press Arm
Helps easy mounting/demounting of the second bead of ultra low profiled tires or run-flat.

2SPEED (TC) PNE

Two speed chuck
Two speed pneumatic chuck, allows to adjust rotation speed in accordance with the type of operation to perform, ensures work efficiency and safety.

Robotic tire changer without use of bead lifting lever, suitable for fitting/removing all kinds of passenger car and LCV tires from 12" to 34" (max. wheel diameter 1200 mm/47", max wheel width 406 mm/16"), no risk of damaging the rim because of no contact between finger tool and rim (no contact and leverless tire changer).
Suggested for top professional tire specialists, servicing run flat and UHP tires with no tool/rim contact.
Functions
  • Double arm/disk air operated bead loosener system;
  • Equipped with total no contact mount/demount tool;
  • Double rotation speed by pedal and motoinverter;
  • Patented SMART LOCK ultra-quick wheel clamping system, through cone and shaft with Smart Lock nut;
  • Wheel positioning through motorized clamping chuck and laser pointer;
  • Tire inflation by pedal (standard);
  • Operated by pedal and joystick;
  • Equipped with Press Arm (standard);
  • Suitable for Tire Lift (optional).
WDK: Version available upon request
Rim clamping range 12" - 34"
Max. tire diameter 1200 mm (47")
Max. tire width 406 mm (16")
Bead loosener force at 10 bar 14406 N
Operating pressure 10 bar (145 psi)
Power supply 220V - 1ph / 2 speed
Motor power 0,75 kW
Rotating speed 7-16 rpm
Pre-set tire inflating pressure 3,5 bar (50 psi)
Net weight 515 kg
Max overall dimensions 1350x2000x1900 mm

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information