Automatic Heavy Duty Truck Tire Changer 12" - 46"/58"(1)

Automatic tire changer suitable for truck and heavy duty tires with 12" - 46"/58" rim (max. wheel diameter 2500 mm./98", max. wheel width 1500 mm./ 58"). Suggested for truck, bus, agriculture and earth-moving heavy tires, professional truck tire service and high volume shops. Suitable for both tube and tubeless tires.

Approved by
Tire changer suitable for truck and heavy duty tires with 12" - 46"/58"(1) rim (max. wheel diameter 2500 mm./98", max. wheel width 1500 mm./ 58"), equipped with two-speed hydraulic clamping chuck, tool hold arm and chuck hold arm carriages both with automatic motion and automatic tool rotation for a full automation of functions, and mobile control unit for safe and convenient operation. Operating arm and clamping chuck holding arm, moving on the same axis and working differently than in the other models, always keep same angle for best performance on all tires. This solution also allows working at any height from ground (even a few centimeters) making tire mounting / demounting operation safer.
Work easily and SAFELY on wheels lifted just few centimeters from the ground !
Suggested for truck, bus, agriculture and earth-moving heavy tires, professional truck tyre service and high volume shops.

Functions
  • Hydraulic movement of clamping chuck holding arm (up-down and left-right);
  • Hydraulic travel movement of operating arm carriage (left-right);
  • Operating arm and clamping chuck arm tilting in same direction, working always with 90° angle;
  • Operating arm and clamping chuck arm travelling left-right simultaneously;
  • Double tool (disk + finger) hydraulic automatic rotation;
  • Wheel clamping by fully hydraulic operated jaws;
  • Operating arm hydraulic automatic tilting and travelling on carriage;
  • All motions controlled by console and pedal box;
  • Emergency safety button on control console, for stopping all functions;
  • Suitable for control console installation on pivoting arm (optional);
  • Rim center hole clamping range ø 80 - 1200 mm;
  • Clamping chuck minimum height from ground 365 mm (center);
  • Suitable for remote control installation (optional).
(1) For the rims from 47" to 58" it is necessary to use the optional set of 4 jaw extensions for clamping wheels from 47" to 58".
Made In Italy
Rim clamping range without extensions 12" - 46"
Rim clamping range with extensions (optional) 12" - 58"
Max. tire diameter 2600 mm (102")
Max. tire width 1530 mm (60")
Rim center hole minimum clamping diameter 80 mm
Clamping chuck minimum height from ground 365 mm
Max. tire assembly weight 2000 kg
3 speed clamping chuck rotation 1 - 4 - 9 rpm
Clamping chuck motor power 2,2 kW
Hydraulic pump motor power 3 kW
Operating pressure 160 bar (2320 psi)
Power supply 400V (50/60 Hz) - 3ph / 3 speed
Other voltages and frequencies available upon request
Bead loosener force 37600 N
Net weight 1370 kg
Max overall dimensions 2420÷3150x2350÷2600x1030÷1970 mm
spinner

Super-Automatic Heavy Duty Tire Changer 14" - 56". All motions...

controlled by console and pedal box.

S 558 demounting/mounting agricultural tresi

Find your nearest Giuliano Automotive Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Automotive can now offer you the right product, which best suits your needs.


Information