Heavy duty tyre changer for run-flat, military, armored and standard wheels.
The only existing tyre changer to service RUN-FLAT, military, armored and standard tyres for trucks and heavy duty vehicles. Suitable for both tube and tubeless tyres.
Combined with a set of hydraulic cyilnders and pistons, and using dedicated accessories, it is suitable for removing the solid band anchored to the rim inside military and armored tyres.
- Hydraulic movement of clamping chuck holding arm (up-down).
- Hydraulic travel movement of operating arm carriage (left-right).
- Operating arm and clamping chuck arm facing each other.
- Rim center hole clamping range ø 80 - 1200 mm.
- Clamping chuck minimum height from ground 315 mm (center).
- Clamping chuck is powered by two speed electric motor.
- Wheel clamping by fully hydraulic operated jaws. Multistage clamping jaws.
- Double tool (disk + finger) manual rotation.
- Operating arm manual tilting and travelling on carriage.
- All motions controlled by console and pedal box.
- Emergency safety button on control console, for stopping all functions.
- Wide and low profiled platform eases the loading of heavy wheels.
- Engineered and Built in Italy.
- Suitable for remote control installation (optional). Replaces standard cables and enables all functions control by radio transmission.
Extensive selection of Standard accessories: flanges for 16”/20” wheels, bead breaking lever, centering brackets for 16”/20” wheels, extensions for 16”/20” wheels (4 pieces), mounting band.
Discover new photos and leaflet!