Attention! The selected product is out of production.

Truck tyre changer 13"-27" for mobile tyre service

Approved by
Main Features
Truck (TC)

Suitable for truck wheels


Allows to operate with tyre assemblies from 13" to 27".


Jaw Clamping
Rim clamping is performed by means of 4 jaws facing each other, driven by pneumatic cylinders connected to the control pedal.


Grants fast and accurate movements with maximum simplicity and accuracy.


Roller Bead Breaking
Bead breaking by disks, without contact with the rim, works with tyre assembly in horizontal position

Truck tyre changer for mobile-service of truck, bus and road transportation vehicle tyres, fits in most popular commercial vans. Tyre changer suitable for truck wheels with 13"-27" rim (max wheel diameter 1600 mm./63", max. wheel width 870 mm./34"), equipped with single speed hydraulic clamping chuck and movable control unit, for safe and convenient operation. Suitable for tubeless tyres only.
  • Hydraulic movement of clamping chuck holding arm (up-down);
  • Hydraulic travel movement of operating arm carriage (left-right);
  • Operating arm manual tilting and travelling on carriage;
  • Wheel clamping by fully hydraulic operated jaws;
  • Machine installation from the side or back door of the van;
  • Clamping chuck holding arm tilts outside the van-door. Folds back inside the van after use;
  • All motions controlled by joysticks and pedal box;
  • Emergency safety button on control console and generator, for stopping all functions;
  • Rim center hole clamping range ø 80 - 700 mm;
  • Clamping chuck minimum height from ground 330 mm (according to van's floor height);
  • Available in version without generator and compressor (optional).
    See generator and compressor specs here below
  • Generator
    • Power - 10,6 kW;
    • Supply - Diesel;
    • Cooling - H2O;
  • Compressor
    • Capacity - 100 lt;
    • Air delivery - 650 lt/min;
    • Voltage - 230V 1ph/400V 3 ph;
  • Also equipped with 2 air feeding plugs and hoses, complete with coilers mt. 10, plus one extra electric plug for connecting 220V-1ph outlet.
Made In Italy
Rim clamping range 13" - 27"
Max. tyre diameter 1600 mm (63")
Max. tyre width 870 mm (34")
Bead breaker force 16900 N
Operating pressure 120 bar (1740 psi)
Power supply 400V - 3ph
Other voltages and frequencies available upon request
Hydraulic pump motor power 1,1 kW
Clamping chuck motor power 1,1 kW
Net weight 860 kg - 492 kg
Net weight without compressor/generator
Max. tyre assembly weight 1000 kg
Max overall dimensions 1700x1070x1580 mm