Attention! The selected product is out of production.

PAR-MOVE concept high performance super-automatic LEVER - NO LEVER tyre changer with combined two assist arms

Approved by
Inspection of mounting machine according to wdk-test guideline based on wdk-Mounting/Demounting Instructions UHP and Run Flat Tyres.
(*) Version available upon request
Main Features
Car (TC)

Car
Suitable for car wheels

LNL (TC)

Lever NO Lever
The only system that combines the advantages of “leverless” device to those of a standard mount/demount tool (Giuliano Patent).

SUPER2 (TC)

Superautomatic
PAR-MOVE Concept Model with three control pedals plus 1 side pedal for bead breaker. Robust fixed vertical tower, space-saving articulated up-and-down movement through parallelogram operating arm with ergonomic and effortless positioning and locking. Mounting tool automatically moves up and backwards.

10\

10"-28"
Allows to operate with tyre assemblies from 10" to 28".

RACING (TC)

Racing
Tyre changer with reinforced chassis.

JC (TC)

Jaw Clamping
Rim clamping is performed by means of 4 jaws facing each other, driven by pneumatic cylinders connected to the control pedal.

BBB (TC)

Blade Bead Breaking
Bead breaking by conventional blade, works with tyre assembly in vertical position

PAR MOVE (TC)

Parallelogram Move Concept
Robust fixed vertical tower with innovative parallelogram operating arm (PAR-MOVE Concept) allows to install tyre changer in a working space corresponding to its actual overall dimensions inside the tyre shop with no extra rear and side space required. The new design makes the tyre changer extremely robust and stiff, granting increased rigidity and eliminating all flexes, and memorizing working position.

HLP (TC)

Help
Helps easy mounting/demounting of tyres, keeping down the tyre bead and allowing an easy introduction of bead lever as well as an easy setting in position of the second bead.

BP1+ (TC)

Bead Pressing Arm Plus
BP1 Plus pneumatic bead pressing arm (GIULIANO patent) lifts up automatically at the end of the mounting procedure, and moves back in rest position, with no need for the operator to change his working position.

PO (TC)

PO System
Patented GIULIANO device to prevent bead breaker blade from getting stuck between rim and tyre bead during bead breaking operation.

SBS (TC)

Smart Blade System
Patented GIULIANO device to memorise bead breaker arm/shovel travel; it is possible to pre-set the starting and final position of bead breaker arm movement. It allows to break the bead of a full set of four wheels without using hands on both bead breaker arm and blade.

PX (TC)

Power X
Turntable plate with 4 cylinders, exclusively patented by GIULIANO, allows clamping tyre assembly with higher power, reliability and safety.

2SPEED (TC) PNE

Two speed chuck
Two speed pneumatic chuck, allows to adjust rotation speed in accordance with the type of operation to perform, ensures work efficiency and safety.

High performance super automatic lever-no-lever tyre changer with combined two assist arms for wheels with rim from 10" to 28" (max. wheel diameter 1200 mm./47", max. wheel width 406mm./16").

Functions
  • Robust fixed vertical tower with innovative parallelogram operating arm (PAR-MOVE Concept);
  • Bead breaker double effect Cylinder Ø 200 mm;
  • Reinforced Chassis. Fixed vertical tower and parallelogram operating arm makes SX 120 PRO DUO LNL extremely robust and stiff, granting increased rigidity and eliminating all flexes;
  • Tabletop thickness 14 mm w/POWER X four cylinders clamping system (Giuliano Patent);
  • Lever - No Lever tyre mounting/demounting sytem, Giuliano patent with combined option through patented Lever - No Lever device;
  • Double rotation speed by pedal (motoinverter);
  • Tyre inflation by pedal (standard);
  • Patented SBS System for bead breaker shovel travel memory. Adjustable bead breaker shovel angle;
  • PO System, Giuliano patent, for granting no bead breaker shovel stuck into the rim during bead breaking operations;
  • Equipped with BP1 Plus bead pressing arm (standard), complete with self-storage function, Giuliano patent;
  • Equipped with Help 120 additional pneumatic helper tower and Box 120 Tools Storage Box (standard);
  • Suitable for Wheel Lifter and tubeless tyre bead seating system (optional).
Made In Italy
Rim clamping range from outside 10" - 26"
Rim clamping range from inside 12" - 28"
Max. tyre diameter 1200 mm (47")
Max. tyre width 406 mm (16")
Bead breaker cylinder force at 10 Bar 30800 N (3140 Kg)
Operating pressure 8-10 bar (116-145 psi)
Power supply 220V 1ph 50/60 Hz
Motor power 0,75 kW
(with motoinverter)
Balancing speed 8-16 rpm
Pre-set tyre inflating pressure 3,5 bar (50 psi)
Net weight 434 Kg
Max overall dimensions 1760x1250x2200 mm

SX 120 vs Standard Steel

SX 120 vs Low Profile

SX 120 vs Run Flat

Information