Tire machine suitable for truck and bus fleets with 13"-27" rim (max. diameter 1600 mm./63", max. wheel width 780mm./30"). Equipped with two-speed hydraulic clamping chuck and movable control unit, for safe and convenient operation.
Suggested for professional truck tire service and high volume shops. Compact tire changer for intensive use.
Functions
Hydraulic movement of clamping chuck holding arm (up-down);
Hydraulic travel movement of operating arm carriage (left-right);
Operating arm manual tilting and travelling on carriage;
Double tool (disk + finger) manual rotation;
Wheel clamping by fully hydraulic operated jaws;
Operating arm and clamping chuck arm facing each other;
All motions controlled by console and pedal box;
Emergency safety button on control console, for stopping all functions;
Suitable for control console installation on pivoting arm (optional);
Rim center hole clamping range ø 80 - 700 mm;
Clamping chuck minimum height from ground 330 mm (center).
Rim clamping range
13" - 27"
Max. tire diameter
1600 mm (63")
Max. tire width
780 mm (30")
Bead loosener force
18300 N
Operating pressure
130 bar (1885 psi)
Power supply
400V - 3ph / 2 speed Other voltages and frequencies available upon request
Hydraulic pump motor power
1,1 kW
Clamping chuck motor power
1,3 / 1,8 kW
Net weight
560 kg
Max. tire assembly weight
1500 kg
Max overall dimensions
1430÷1750x1550÷1740x1270 mm
Discover newphotos and leaflet!
Product Details
This document includes all information about the product
