S 557

Tyre changer suitable for truck and bus fleets tyres

Tyre changer suitable for truck and bus fleets (for both tube and tubeless tyres) with 13"-27" rim (max. wheel diameter 1600 mm./63"; max. wheel width 780 mm./30"). Suggested for professional truck tyre service and high volume shops.

Approved by
Main Features
Truck (TC)

Truck
Suitable for truck wheels

13\

13"-27"
Allows to operate with tyre assemblies from 13" to 27".

JC (TC) TRUCK

Jaw Clamping
Rim clamping is performed by means of 4 jaws, driven by hydraulic cylinder.

PANEL (TC) - TRUCK

Control Console
Ergonomic control console allows controlling each single automatic movement and positioning of the machine by using a pedal and joystick.

RBB (TC) - DISK VERT

Roller Bead Breaking
Bead breaking by disk, works with tyre assembly in vertical position

2SPEED (TC) PNE

Two speed chuck
Two speed pneumatic chuck, allows to adjust rotation speed in accordance with the type of operation to perform, ensures work efficiency and safety.

Tyre changer suitable for truck and bus fleets with 13"-27" rim (max. diameter 1600 mm./63", max. wheel width 780mm./30"). Equipped with two-speed hydraulic clamping chuck and movable control unit, for safe and convenient operation.
Suggested for professional truck tyre service and high volume shops.
Functions
  • Hydraulic movement of clamping chuck holding arm (up-down);
  • Hydraulic travel movement of operating arm carriage (left-right);
  • Operating arm manual tilting and travelling on carriage;
  • Double tool (disk + finger) manual rotation;
  • Wheel clamping by fully hydraulic operated jaws;
  • Operating arm and clamping chuck arm facing each other;
  • All motions controlled by console and pedal box;
  • Emergency safety button on control consolle, for stopping all functions;
  • Suitable for control console installation on pivoting arm (optional);
  • Rim center hole clamping range ø 80 - 700 mm;
  • Clamping chuck minimum height from ground 330 mm (center).
Rim clamping range 13" - 27"
Max. tyre diameter 1600 mm (63")
Max. tyre width 780 mm (30")
Bead breaker force 18300 N
Operating pressure 130 bar (1885 psi)
Power supply 400V - 3ph / 2 speed
Other voltages and frequencies available upon request
Hydraulic pump motor power 1,1 kW
Clamping chuck motor power 1,3 / 1,8 kW
Net weight 560 kg
Max. tyre assembly weight 1500 kg
Max overall dimensions 1430÷1750x1550÷1740x1270 mm
Standard Accessories
Standard accessories
Optional Accessories
Roller tool for mounting / demounting tubeless truck tyres
Kit of spacers for the clamping jaws, for locking wheels with various thickness of flanging.
Set of 2 G-clamps for tyres with retaining ring. To hold rim and bead retaining ring during bead breaking operation.
Kit of clamp protections in aluminium for alloy rims.
Clamp for alu-rims.
G-Clamp with wider bead-press angle, for agriculture tyres.
S 551 XL
S 551 XL
S 551 XLA
S 551 XLA
S 562
S 562

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information