S 562

Tire changer for mobile service of truck, bus and road transportation vehicle tires

Tire changer 13"-27" for mobile service of truck, bus and road transportation vehicle tires, fits in most popular commercial vans. Suitable for tubeless tires only.

Approved by
Main Features
Truck (TC)

Truck
Suitable for truck wheels

13\

13"-27"
Allows to operate with tire assemblies from 13" to 27".

JC (TC)

Jaw Clamping
Rim clamping is performed by means of 4 jaws facing each other, driven by pneumatic cylinders connected to the control pedal.

JOYSTICK

Joystick
Allows to move the tool with maximum simplicity and accuracy.

RBB (TC)

Roller Bead Breaking
Bead loosening by disks, without contact with the rim, works with tire assembly in horizontal position

Tire changer 13"-27" for mobile service of truck, bus and road transportation vehicle tires, fits in most popular commercial vans. Suitable for tubeless tires only.

Features
  • Hydraulic movement of clamping chuck holding arm (up-down);
  • Hydraulic travel movement of operating arm carriage (left-right);
  • Operating arm manual tilting and travelling on carriage;
  • Hydraulic motor for clamping chuck rotation;
  • Wheel clamping by fully hydraulic operated jaws;
  • Machine installation from the side or back door of the van;
  • Clamping chuck holding arm tilts outside the van-door. Folds back inside the van after use;
  • All motions controlled by joysticks and pedal box;
  • Emergency safety button on control console and generator, for stopping all functions;
  • Rim center hole clamping range ø 80 - 700 mm;
  • Clamping chuck minimum height from ground 330 mm (according to van's floor height);
  • Available in version without generator and compressor (optional)
  • Generator:
    • Power 10,6 kW;
    • Supply Diesel;
    • Voltage 230 V 1ph 400 V 3ph;
    • Cooling H2O;
  • Compressor:
    • Capacity 100 lt;
    • Air flow 650 lt/min;
    • Voltage 230V 1ph/ 400V 3ph;
    • Also equipped with 2 air feeding plugs and hoses, complete with coilers mt. 10, plus one extra electric plug for connecting 220V-1ph outlet.
Rim clamping range 13"-27"
Max. tire diameter 1600 mm (63")
Max. tire width 870 mm (34")
Max. tire assembly weight 1000 Kg
Max. bead-loosener cylinder force 18760 N
Rim center hole minimum clamping diameter 80 mm
Operating pressure 130 Bar (1885 Psi)
Power supply 400V - 3ph
Other voltages and frequencies available upon request
Hydraulic pump motor 2,2 kW 400V 3ph
Gearbox motor power Hydraulic
Net Weight 543 Kg
Generator + Compressor net weight 416 Kg
Standard Accessories
Standard accessories
Optional Accessories
Roller tool for mounting / demounting tubeless truck tires
Double mounting tool with bead levers.
Kit of spacers for the clamping jaws, for locking wheels with various thickness of flanging.
Bead clamp with extra slide, for skidder tire applications.
Kit of clamp protections in aluminium for alloy rims.
Clamp for alu-rims.
G-Clamp with wider bead-press angle, for agriculture tires.
Multichannel radio control 433 MHz
Sculpting Kit, installed on truck tyre changer for mobile service allows the wheel to rotate at a reduced speed to sculpt the tyre tread using the special tool (not supplied as standard).
S 557
S 557
S 551 XL
S 551 XL
S 551 XLA
S 551 XLA

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information