Truck tyre changer for intensive use

Truck tyre changer 13” - 27” for truck and bus wheels.

Tyre changer suitable for truck and bus fleets with 13"-27" rim (max. diameter 1600 mm./63", max. wheel width 780mm./30"). Equipped with two-speed hydraulic clamping chuck and movable control unit, for safe and convenient operation.
Suggested for professional truck tyre service and high volume shops. Compact tyre changer for intensive use.
Functions

Hydraulic movement of clamping chuck holding arm (up-down);
Hydraulic travel movement of operating arm carriage (left-right);
Operating arm manual tilting and travelling on carriage;
Double tool (disk + finger) manual rotation;
Wheel clamping by fully hydraulic operated jaws;
Operating arm and clamping chuck arm facing each other;
All motions controlled by console and pedal box;
Emergency safety button on control consolle, for stopping all functions;
Suitable for control console installation on pivoting arm (optional);
Rim center hole clamping range ø 80 - 700 mm;
Clamping chuck minimum height from ground 330 mm (center).

Rim clamping range	13" - 27"
Max. tyre diameter	1600 mm (63")
Max. tyre width	780 mm (30")
Bead breaker force	18300 N
Operating pressure	130 bar (1885 psi)
Power supply	400V - 3ph / 2 speed Other voltages and frequencies available upon request
Hydraulic pump motor power	1,1 kW Other voltages and frequencies available upon request
Clamping chuck motor power	1,3 / 1,8 kW Other voltages and frequencies available upon request
Net weight	560 kg Other voltages and frequencies available upon request
Max. tyre assembly weight	1500 kg Other voltages and frequencies available upon request
Max overall dimensions	1430÷1750x1550÷1740x1270 mm Other voltages and frequencies available upon request